This will be a very rewarding project, if you require a high capacity outdoor wood burning stove, but are concerned about the cost of commercial units. This unit was designed to accept 10 -13 full size pallets, and was built for about $1600. You should also budget an additional $300 - $600 to plumb the completed unit into your existing heating system. These costs will vary, depending on your current or proposed heating system design.

This stove features:

• A large 90 cubic ft. firebox measuring 1/4" thick by 52 " wide x 50" deep x 60" high
• A 280-gallon capacity water jacket
• A large, water filled, loading door
• Automatic, adjustable, thermostatic control of the water jacket temperature
• A blower induced, powered damper, draft control system
• An adjustable door hinge system
• A complete design requiring no additional housing
• An open vent design, preventing the possibilities of dangerous pressures
• The ability to burn any type of pallets or other wood without the worry of creosote build-up and potential chimney fire

Included in this plan set is:

• A complete material list, including sources
• Construction tips learned from building prototypes
• Step by step construction drawings
• Electrical and plumbing schematics
• Start up and maintenance instructions
• An extensive photo gallery of the stove construction
• More than 50 pages